Nuri

 Simple and convenient user interface

-. Without changing multiple screens, you can get your answer all at once.

Effective input system

-. If you want to use same numeric value, you do not need to input numeric value again. You can just change the unit to convert.

Convenient functions

-. Using two buttons “+” and “-“at the bottom of screen, you can easily find the correct unit that you want.

Measuring units from Unit Converter

1.  Length Conversion - meter, foot, inch, yard, kilometer, mile, nautical mile, light year...
2. Temperature Conversion - Celsius, Fahrenheit, kelvin
3. Speed Conversion - meter/second, kilometer/hour, foot/second, speed of light...
4. Volume Conversion - liter, cubic meter, gallon, quart, pint, bushel, barrel...
5. Weight and Mass Conversion - kilogram, pound, gram, tonne, ton, ounce, newton...
6. Area Conversion - square meter, square foot, square mile, acre, hectare...
7. Energy and Work Conversion - joule, foot-pound, kilowatt-hour, BTU, Calorie...
8. Power Conversion - watt, kilowatt, BTU/hour, calories per second, horsepower...
9. Pressure Conversion - Pascal, bar, millibar, torr, pounds per square inch...
10. Angle Conversion - degrees, radians, grad, ful circle

How to use this program

1. Touch the text box which is written “input”. Then, you will see a keyboard. After inserting the numeric value, press “Done” button.
2. Next, press the input unit, which are the yellow boxes located right below the input box. When you have selected the right measurement unit, look to the right side of the input box. The word on the top is the abbreviation of that unit included in the measurement unit, at the bottom is the full name of the unit. For example the word on the top for pound would be lb, and the word at the bottom would say “pound”.
3. After selecting the correct input unit, you have to choose the output unit you want to convert it into. You apply the same instructions for choosing input unit to choosing your output unit. Your output measurement units are located under the word, “output’. Just incase you select the wrong unit, you can press the “+” or “-“ button to go back or fast-forward to other units, but you need to be aware of the fact that “+” and “-“ button will only rotate the units in that 1 measurement category that you selected.
4. For the very last step, you have to push down the blue “conversion” button. You will see the output value at the place where the word”output” was written.